moodLearning Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
troubleshooting-elib-box [2018/12/08 06:10]
serbizadmin [Raspberry Pi 3 with Raspbian Stretch]
troubleshooting-elib-box [2020/06/13 15:10] (current)
Line 15: Line 15:
         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
 </code> </code>
- + or do 
 +<code> 
 +sudo service dhcpcd status 
 +</code> 
 +and you'll have something like this 
 +<code> 
 +systemd[1]: Starting dhcpcd on all interfaces... 
 +dhcpcd[330]: Not running dhcpcd because /etc/network/interfaces 
 +dhcpcd[330]: defines some interfaces that will use a 
 +dhcpcd[330]: DHCP client or static address 
 +systemd[1]: dhcpcd.service: Control process exited, code=exited status=6 
 +systemd[1]: Failed to start dhcpcd on all interfaces. 
 +systemd[1]: dhcpcd.service: Unit entered failed state. 
 +systemd[1]: dhcpcd.service: Failed with result 'exit-code'
 +</code> 
 +  * inject 
 +<code> 
 +ifconfig eth0 192.168.1.66 <or some appropriate number on the dhcp network> 
 +</code> 
 +  * adjust dhcp via /etc/dhcpcd.conf 
 +<code> 
 +static domain_name_servers=172.24.1.1 192.168.1.1 
 +</code> 
 +Or via /etc/dhcp/dhclient.conf with this entry 
 +<code> 
 +option domain-name-servers 172.24.1.1, 192.168.1.1, 8.8.8.8 
 +</code> 
 +Adjust the latter according to the appropriate number for the eth0 network. 
 +  * confirm  
 +<code> 
 +hostname -I 
 +</code> 
 +\\
 ===== Raspberry Pi 3 Model B+ does not boot ===== ===== Raspberry Pi 3 Model B+ does not boot =====
 If these conditions obtain: If these conditions obtain: